100% Carbon Fiber Rear Fender Wheel Mud Guard For YAMAHA MT-10 R1 2015-2020

  • $250.00
Shipping calculated at checkout.


Yamaha R1 Carbon Fiber 2015 - 2020 (Rear Fender Wheel Mud Guard) | 12K Motor

 

All 12K MOTOR Yamaha R1 Carbon Fiber 2015 - 2020 with rear fender wheel mud guard are made with an Autoclave process, which uses the highest quality carbon fiber fabric from Japan.

Yamaha R1 Carbon fiber parts04 06 Yamaha R1 Carbon fiber

Cures at 400 degrees and a pressure of 5Kg/cm. One of the most advanced techniques for making composite components is by using PrePreg carbon fiber reinforcement.

cured under heat and pressure to produce professional-quality parts with a high-quality surface finish, low resin content, and excellent structural performance for your motorcycle.

Compatible Vehicles

AUM_Make AUM_Model AUM_Power AUM_Submodel Year
Yamaha MT 118 MT-10 2021
Yamaha MT 118 MT-10 2020
Yamaha MT 118 MT-10 2019
Yamaha MT 118 MT-10 2018
Yamaha MT 118 MT-10 2017
Yamaha MT 118 MT-10 2016

 

12K Motor offers high-quality Yamaha R1 Carbon Fiber 2015 - 2020 with rear fender wheel mud guard for sports motorcycles with excellent customer satisfaction. We are keeping a large inventory of Yamaha R1 Carbon Fiber 2015 - 2020 with rear fender wheel mud guard in Australia with various models.

We can also produce carbon fiber products of older models within a few weeks. We offer many variations of compositions and colors that can be ordered through our online platform. 12K Motor also supports personalized design and customization requirements based on our customer's requests.

All of our Aftermarket Yamaha R1 fairings 2015-2020 motorcycle motorbike fairing kits come with complete set of fairing panels and parts‚ painted & decal same as per photo shown, to rejuvenate your motorbike.

Most of Aftermarket Yamaha motorbike fairing set comes with a front mudguard, front upper fairing, left and right sides including belly pain or lower side panels, and full rear ducktail fairing parts.

Some Yamaha aftermarket fairing kits include a tank cover and rear seat cowl as well to match the whole motorbike fairing design.

Our tabs at the top of the page disclose all the relevant details that may help with your purchasing decision. We also 100% guarantee customer satisfaction, warranty our products for fitment and finish, and strive to give the highest level of customer service.  

Advantages of carbon fiber motorcycle accessories

Carbon fiber motorcycle accessories are a high-performance structural material, known as a new type of material, and are widely used in many fields. In addition to cars, motorcycles are also the most commonly used travel tools for young people. With the increase in requirements for motorcycles, carbon fiber is gradually used to make motorcycle accessories.

After carbon fiber is used in the field of motorcycles, the significant advantage brought about is the lightweight of motorcycles, which can directly affect the improvement of energy saving, acceleration and braking performance. Generally speaking, the weight of the vehicle is reduced by 10%, and the fuel consumption is reduced by 6% or even 8%, reducing energy consumption and increasing cruising range. The carbon fiber motorcycle accessories material has a good energy absorption rate, which further ensures the safety of the motorcycle.

Different from other structural materials, carbon fiber has a very strong designability, and can flexibly design products according to different application requirements to meet the requirements of use. In the actual application process, carbon fiber motorcycle parts are lighter materials for the manufacture of main structural parts such as body and chassis, and carbon fiber materials are also used in brake pads. Due to the high cost of carbon fiber materials, it is mainly used in racing cars and some relatively good cars.


Premium Quality Carbon Fiber Motorcycle Parts

All 12K MOTOR carbon fiber parts are made with an Autoclave process. It uses the highest quality carbon fiber fabric from Japan.

Cures at 400 degrees and a pressure of 5Kg/cm. One of the most advanced techniques for making composite components is using PrePreg carbon fiber reinforcement. The cured is under heat and pressure to produce professional parts with a high-quality surface finish: the low resin content and excellent structural performance for your motorcycle.

  • UV protective coating and hand-polished to a perfect finish.
  • Maximum strength and durability.
  • Quick and easy assembly.
  • Most of our products are direct bolt-on replacements of OEM parts.
  • Lighter and more robust than the original plastic parts
  • Three months limited warranty, unless the product is drilled, scratched, painted, or altered in any way

Extra services for fairings

 

 

HONDA CBR600RR FAIRING KITHONDA CBR600RR FAIRING ENCLOSED HEADLIGHT HOLEHONDA CBR600RR FAIRING TAIL PART

 

 

SUZUKI FAIRING KIT TANK REPAINTSUZUKI FAIRING KIT BLUESUZUKI FAIRING KIT BLUE TANK

 

 

12K MOTOR FACTORY12K MOTOR FAIRING FACTORY12K MOTOR FAIRING KIT FACTORY12K MOTOR WORKSHOP STOCKING

  

lUV protective coating and hand-polished to a perfect finish.

lMaximum strength and durability.

lQuick and easy assembly.

lMost of our products are direct bolt-on replacement of OEM parts.

lLighter and stronger than the original plastic parts 

l3 months limited warranty, unless product is drilled, scratched, painted, or altered in any way